The history is cornerstone of the
present time as well as challenge to the future
匠心底蕴 挑战未来
EN logo ZKL Group
有轨电车用新型车轴滚子轴承 / New axle roller bearings for trams
2023-01-05 17:03 — admin
The development of axle roller bearings for trams was completed in the ZKL Klášterec nad Ohří production plant as a proof of the continuous expansion of the range for rolling stock withing the ZKL Group.
ZKL克莱斯勒工厂完成了有轨电车用滚动轴承的开发，这证明了ZKL集团对机车车辆用轴承范围的不断扩大。
The pair of PLC 410-77/78 bearings is of the WJ/WJP design type with increased requirements for the accuracy of matching. These bearings were manufactured for the assembly of new trams by a Polish manufacturer.
PLC 410-77/78轴承对为WJ/WJP设计类型，对匹配精度的要求更高。这些轴承是为一家波兰制造商为组装新电车而生产的。
Technical parameters of the bearings:
Axle diameter: 120 mm
Maximum vehicle speed: 70 km/h
Maximum static load on the bearing pair: 50 kN
Tram wheel diameter: 610/530 mm
ZKL克莱斯勒工厂完成了有轨电车用滚动轴承的开发，这证明了ZKL集团对机车车辆用轴承范围的不断扩大。
The pair of PLC 410-77/78 bearings is of the WJ/WJP design type with increased requirements for the accuracy of matching. These bearings were manufactured for the assembly of new trams by a Polish manufacturer.
PLC 410-77/78轴承对为WJ/WJP设计类型，对匹配精度的要求更高。这些轴承是为一家波兰制造商为组装新电车而生产的。
Technical parameters of the bearings:
Axle diameter: 120 mm
Maximum vehicle speed: 70 km/h
Maximum static load on the bearing pair: 50 kN
Tram wheel diameter: 610/530 mm
轴承的技术参数：
轴径：120mm
最高车速：70 km/h
轴承对上的最大静载荷：50 kN
有轨电车车轮直径：610/530 mm
ZKL
ZKL is the biggest manufacturer of large-scale spherical-roller, special and split bearings in Central Europe.
捷克ZKL集团是中欧地区最大的通用轴承，特种轴承，剖分轴承生产商。
Copyright © 2012 ZKL, a.s.
津ICP备19009899号-1
津ICP备19009899号-1